Hydraulic Post Driver - Power Master Series 8 from El-Gra Engineering, Australia

Australia's Most Powerful & Versatile Post Driver

Comes with standard features others just dream about.

Discover the unique features of the El-Gra Power Master post driver as you browse the information below. As a Power Master owner, you'll benefit from the many time-saving features engineered into this superb offering from Australia's leading designer of tractor-mounted farm machinery.

Because safety it paramount when using farm machinery, the Power Master has been designed with user safety very much in mind. Some of the more important safety features of this unique post driver are...

• a very wide base and two (2) separate footpads allow for safe and efficient operation on hilly or sloping terrain.
• Fail Safe design of the hydraulics prevents further operation once a control lever is released.
• safety guards are fitted for further operator protection.
• The post driver's auger is hydraulically positioned, removing the danger of manual positioning.

The following images illustrate the tilting function of the Power Master hydraulic post driver.

Hydraulic Tilt Features

The wide range of tilting adjustment makes the Power Master the ideal machine for rough, or hilly ground, with the following capabilities...

Sideways Tilt: East/West = 20 degrees + or -  Overall = 40 degrees (approx.)

Forward/Aft Tilt: North/South = 12 degrees  + or -  Overall = 24 degrees (approx.)

• All tilts have a fine rate of adjustment, providing "The Feel" required to accurately level the machine with ease.
• The low Tilt Pivot Point means that the auger entry point does not move if the side tilt adjustment is made, this stops 'crabbing'.

Increased functionality to make your life easier!

The Power Master post driver is packed with features to improve your productivity, with revolutionary greaseless design requiring NO LUBRICATION during the life of the machine. Just a few of these time-saving design features are...

• auger is fully independent of the hammer mechanism.
• the auger is hydraulically forced into the ground by the aid of its own ram. It can deliver up to 600kg (1,350lbs) of force for those tough jobs.
• positioning of the auger under the hammer is done hydraulically, with no manual handling.
• features a Heavy Duty Auger Motor fitted with two (2) bearings to prevent damage with shock loads and deflections when drilling into hard or rocky ground.
• the auger motor drive can run augers from 3" (75mm) up to 10" (250mm) in size.
• heavy duty rock augers are also available.
• the Series 8 Power Master can handle a standard 8' post with the machine on the ground. By raising the linkage a 9' 6" post can be driven.
• Standard 300kg hammer (675lbs)
• Optional 350kg and 400kg (785lbs/900lbs)

Contact El-Gra Engineering today to discover how this unique post driver can help you achieve greater efficiency with any fencing or post-driving task. Call (02) 4423 3499, or fill out our hydraulic post driver enquiry form for more information.

*El-Gra Engineering reserve the right to vary any of the above specification at their discretion.

All El-Gra post drivers comply with the Australian Post Driver Industry Safety Standards. El-Gra management sit on the board of the industry advisory panel.